-
Description
[Overview]
This is single output 24V 10A 250W Switching power supply, and it can provide upto 250W power output.
[Summary]
- Single output: 24V 10A 250W
- Input: 90~132VAC / 180~264VAC by Switch
[Generay Specification]
- Model: S-250-24
- DC output voltage, current: 24V, 0~10A
- Wave and noise: 150mVp-p
- Inlet wire stability: ±1%
- Load stability: ±1%
- Efficiency: 81.50%
- Adjustable range for DC voltage: ±10%
- Input voltage range: 90~132VAC / 180~264VAC by Switch
- Impact current (Cold start current): 25A/114VAC 50A/230VAC
- OverLoad protection: 105% ~ 135% cut off the output, automatic recovery
- Over voltage protection: 115%~150% shut down O/P voltage, re-power on the recovery
- Setup, rise, hold up time: 200ms, 50ms, 16ms/230vac at full load
- Withstand voltage: I/P-O/P 1.5kV I/P-FG 1.5kV O/P-FG 0.5kV 1minute
- Isolation resistance: I/P-O/P I/P-FG O/P-FG 500VDC/100MΩ
- Working temperature: -10℃ ~ +50℃
- Dimension: 215 x 115 x 50mm
[Generay Specification]
| Item | Description | |
| Model | S-250-24 | |
| DC output voltage, current | 24V, 0~10A | |
| Wave and noise | 150mVp-p | |
| Inlet wire stability | ±1% | |
| Load stability | ±1% | |
| Efficiency | 81.50% | |
| Adjustable range for DC voltage | ±10% | |
| Input voltage range | 90~132VAC / 180~264VAC by Switch | |
| Impact current (Cold start current) | 25A/114VAC 50A/230VAC | |
| OverLoad protection | 105% ~ 135% cut off the output, automatic recovery | |
| Over voltage protection | 115%~150% shut down O/P voltage, re-power on the recovery | |
| Setup, rise, hold up time | 200ms, 50ms, 16ms/230vac at full load | |
| Withstand voltage | I/P-O/P 1.5kV I/P-FG 1.5kV O/P-FG 0.5kV 1minute | |
| Isolation resistance | I/P-O/P I/P-FG O/P-FG 500VDC/100MΩ | |
| Working temperature | -10℃ ~ +50℃ | |
| Dimension | 215 x 115 x 50mm |
Packing List:
- 1 x Switching power supply
- 2 x installation bracket
- 2 * DC cable (length: about 50 cm/19.68 inch)
- 1 x AC cable (length: about 150 m/59.05 inch), EU plug / US plug
